1Pcs Power Supply Module 2MBI100VA series datasheet

2MBI100VA series datasheet

View a preview and download 2MBI100VA-060-50 datasheet at the bottom of this page. You will also find a link to purchase this electronic component. This Breadboard Power Supply Module provides 5V or 3.3V output on two independent channels. It can be powered by regulated or unregulated DC power supplies via the barrel socket or USB-A connector. There is an ON-OFF switch available along with a power LED to indicate the power on status.

The MB102 Breadboard power supply module is an easy-to-use and most useful breadboard component. It provides 3.3V or 5V output and can be configured by changing the jumpers. It can be powered from regulated or unregulated DC power supplies with 6.5-12 VDC input via the DC barrel socket or USB-A socket. The output can be turned ON or OFF by the ON-OFF switch, and the status of the power supply is indicated by a power LED. The insulated-gate bipolar transistors (IGBT) on this board combine the simplicity of gate-drive MOSFETs with the high current and low saturation voltage capability of bipolar power transistors. For more information, see the 2MBI100VA series datasheet preview and download ( pdf file ) link at the bottom of this page.

A voltage regulator is a circuit that, regardless of changes in input or load conditions, creates and maintains a defined output voltage. It may use a feed-forward design or negative feedback. Voltage regulators are essential for complex electromechanical devices that require a stable power source. They help to ensure that the device works correctly and reliably, minimizing issues like LED flickering or “fried” electronics.

1Pcs Power Supply Module 2MBI100VA series datasheet

Choosing the right voltage regulator depends on three main specifications: input and output voltages, and maximum load current. Most applications will have an input voltage lower than the output voltage, so either a linear or buck switching regulator should be used.

To start, solder the resistor to position R1. Make sure the tab-side of the resistor aligns with the fat line on the symbol – backwards won’t work! Then snap the 0.1uF capacitor into position C2. Finally, solder the barrel jack into position B1. This breadboard power supply module will provide you with 5V, 3.3V, and GND output channels to your circuit.

This is a useful breadboard power supply module with 3.3V or 5V output on two channels. The user can select the desired output by changing jumpers. The module has a barrel socket and USB input for power. The input can be regulated or unregulated and there is an ON/OFF switch and a power LED to indicate the status of the board. It is very easy to use and can be connected to any 6.5-12VDC power source unit. The board is easy to interfacing with breadboards and other circuits. It also offers a push switch to turn ON and OFF the entire system.

Fuji 2MBI100VA series datasheet can be viewed online or downloaded as PDF file. There is a preview and download link (2MBI100VA-060-50) at the bottom of this page. This Breadboard power supply module offers two independent channels of 3.3V or 5V selectable output for breadboard projects. Simply connect a regulated or unregulated power source to the 6.5-12 VDC barrel socket at the input section, turn it on by the ON-OFF switch and the power LED indicates the status. The output can be configured by changing the jumpers as per requirement. This is a very useful and handy breadboard power supply component.

Jinftry (JING FU CAI (HONGKONG) INTERNATIONAL CO., LIMITED) is a global professional one-stop procurement and service provider of electronic components. It uses independent distribution, platform distribution combined with the Internet online sales model to sell various products worldwide. Types of electronic components, providing one-stop component procurement and supply chain services to global OEM factory customers and brokers. Sales include integrated circuits, discrete semiconductors, IGBT modules, connectors, capacitors, diodes, transistors and other electronic components, covering power supply, automotive, communications, computers, consumer products, medical, industrial, mobile phone and other application fields.

Jinftry product line cards: TI, ONSEMI, Microchip, Maxim, NXP, STM, Xilinx, Intel, Infineon, Broadcom, Renesas, samtec, Souriau, CISSOID, Mitsubishi, FUJI, Semikron, etc.

Website: https://www.jinftry.com

Shenzhen Operation Center Address: 26F1, Building C, Electronic Technology Building, Shennan Middle Road, Futian District, Shenzhen, Guangdong, China

Hong Kong company name: JING FU CAI (HONGKONG) INTERNATIONAL CO., LIMITED

Registered address of Hong Kong company: Unit No.A222,3F,Hang Fung Industrial Building,Phase2,No.2G Hok Yuen Street,Hunghom,Kowloon,Hong Kong

Email: [email protected]

Tel: +86-755-82518276