5 Steps to Repair the Hole of Poly Rattan Wicker Furniture

Everything, even your favorite wicker furniture, can get damaged one day. One of the common damage that any homeowner would have encountered is the hole in the furniture.

You may think about replacing the furniture at first, but the cost would hurt your pocket. Besides, it’s your favorite after all. Therefore, repair is a possible and reasonable solution for this problem. If it is not too serious, or you want to do DIY, take note of these 5 steps to repair the hole in your wicker rattan furniture correctly.

1. Identifying the damage

First, you need to take a closer look at your rattan wicker furniture to understand the damage. This step is for you to consider the repair action, whether it is re-weaving the rattan or simply putting it back in place. Also, make sure furniture is clean by washing dirt and removing leaves. By doing so, you can easily find more hidden damage to deal with.

2. Preparation of tools and materials.

Depending on the state of the hole, different things will be needed. Some tools required are pliers, wire cutters, and a special tool for pulling wicker furniture.

If there is broken rattan, you will need some additional materials to fill the hole. You can get the tools at any hardware store and purchase rattan materials from furniture manufacturers or wicker suppliers.

3. cut the broken part

Note: You can skip this step if your rattan is not broken.

If the hole is large and the rattan is broken, you may need to cut it. Use the pliers and pulling tool to pull it out, and remove the damaged rattan with a wire cutter or any special scissors.

4. Weave or pull the rattan into place

Prepare newly purchased rattan to fill the hole. It is necessary to check the weaving style of your wicker rattan furniture. Use the needle to help pull the rattan rope out. Don’t forget to cut off the excess and push it back into the surface.

For smaller holes or if the rattan is not broken, just bent, you can use the needle to pull and push the rattan into place. Carefully refit it and tighten it until the hole is clearly hidden.

5. Paint the wicker furniture (if necessary)

After you patch up the hole, you’ll need to repaint it so that the old and new rattan match in color. Keep in mind that this step is only necessary when you have to re-weave your furniture.

After all, remember to check the rattan for tightness. Pull in or cut off any excess to make it smooth. If you are not familiar or experienced with wicker furniture repair, it may be a little loose and not as perfect as furniture makers would make it out to be, but the result is worth it.

Those are all the steps to repair the hole in the wicker outdoor furniture. Do you want to have a clearer and more practical vision of how to repair the hole? Check out this wicker furniture repair video.

We hope you can learn from this advice and manage to repair your wicker furniture yourself. Be proud of your DIY skill.