How to Build a Pressure Washer Surface Cleaner

Build a Pressure Washer Surface Cleaner

If you’re looking to save money and make your own pressure washer surface cleaner, there are a few steps you can take. For starters, you can buy an inexpensive consumer-grade pressure washer – not too powerful, but not too small either. There are also semi-pro models that you can use for small jobs and businesses.

One of the first steps is to make sure your soap bottle is properly attached. This is because soap that’s too thick could pull through the assembly. Also, your detergent should be water-based and free of any harsh chemicals. Finally, keep the bottle clean and free of debris. These steps will ensure that your surface cleaner will work as intended.

The next step in creating a power washer surface cleaner is to choose a pressure washer with enough GPM to power the cleaner. The larger the surface cleaner, the higher the GPM the pressure washer needs to produce. Choosing a pressure washer with enough GPM is essential for getting the best results.

You can also choose a surface cleaner based on its width. The width determines the area that gets cleaned during each pass. Wider surface cleaners require more water to run the nozzles, but they clean much faster. Below is a chart of the water volume required for different surface cleaner diameters.

How to Build a Pressure Washer Surface Cleaner

Once you’ve decided on the pressure and water settings, you can decide on the type of surface cleaner you need. There are two types: spinning and rotary. The spinning ones work best on smooth surfaces, while the rotary ones are better at cleaning rough surfaces. Be sure to read the manufacturer’s instructions for each to make sure you get the best results. You’ll want to make sure the surface cleaner you choose is pressure-rated, and has wheels.

When you purchase a pressure washer surface cleaner, check the warranty. If your cleaner has a warranty, you can purchase a replacement one if the first one is not working properly. Remember to keep in mind that the pressure washer surface cleaner can pick up a lot of dirt. So be sure to clean it regularly. You might want to purchase an inline filter to catch dirt that may be blocking the nozzle.

Choose the right nozzle. Pressure washer surface cleaners generally have a v-jet or 1/8 inch threaded nozzle. To determine which nozzle is right for your cleaning needs, divide the desired pressure by the nozzle size. This will ensure that you get even pressure on both sides. Also, be sure to replace worn nozzles to prevent excessive vibration.

Before cleaning your surface, make sure you’re using the right detergent. You’ll want to use something mild, but not too aggressive. It will clean your surface without causing damage to the surface.